Vertical mills, as large-scale grinding equipment, are widely used in industries such as building materials, power, metallurgy, chemical engineering, and non-metallic minerals. The vertical mill adopts international * vertical mill technology, which integrates crushing, drying, grinding, powder selection, and transportation, ensuring the continuity and stability of production and improving grinding efficiency. Customization can be made according to the material characteristics of customers, with flexible configurations to meet their personalized grinding needs.

　　1. High degree of automation, simple operation, and labor saving.

　　2. The equipment operates stably, efficiently and environmentallyfriendly.

　　3. The supply chain is complete and the delivery cycle is short.

　　We have a large casting base that can ensure the supply of complete equipment and spare parts support.

　　The main motor drives the grinding plate to rotate through a reducer, and at the same time, wind enters the mill from the air inlet. The material falls into the center of the grinding plate through the feeding port of the spiral feeder. Under the action of centrifugal force, the material moves evenly from the center of the grinding plate to the edge. When passing through the grinding roller area on the grinding plate, it is crushed by the grinding roller, and large pieces of material are directly crushed. Fine materials are compressed to form a material bed for inter particle crushing. The crushed material continues to move towards the edge of the grinding disc until it is carried away by the strong airflow at the air ring, while larger granular materials fall back onto the grinding disc and continue to be crushed. When the material in the airflow passes through the upper separator, under the action of the separator blades, the coarse particlesreturn to the grinding disc for grinding. Qualified fine powder is discharged along with the airflow and collected by the system's powder collector. The collected powder is the product of ultrafinevertical grinding. When iron blocks and other debris mixed with materials move to the edge of the grinding disc, they cannot be blown up by the wind due to their large weight,
and fall into the lower chamber of the mill. The scraper plate installed at the bottom of the grinding disc scrapes them into the slag discharge port and discharges them outside the machine.