How to use river pebble sand making machine equipment correctly for production?

　　In open-air operations, the equipment of the river pebble sand making machine often comes into contact with water, which is prone to rusting. The probability of sand rusting can affect the efficiency of the sand making machine and reduce the quality of the generated gravel. Therefore, the rust removal of the river pebble sand making machine equipment is very important. Therefore, how should the rust removal of the sand making machine be carried out? The correct use of effective grinding wheels can not only extend the service life of the equipment, but also reduce some small problems in production, improve production efficiency, and create huge economic benefits for users.

　　Below, our factory teaches you how to use effective river pebble sand making equipment correctly and reasonably. Before starting the machine, check whether the vortex observation door is tightly closed to prevent materials from rushing out of the vortex observation door and causing danger. Check the rotation direction of the impeller and observe the feeding direction from the feeding port. The impeller shaft should rotate counterclockwise, otherwise the motor circuit needs to be adjusted.

　　The starting sequence of the crusher and conveyor is: discharge → crusher → feeding. The crusher must be started with no load and can only be fed after the crusher is working normally. The closing sequence is opposite to the starting sequence. The feeding particles shall strictly follow the specified requirements and shall not enter the crusher in excess of the specified quantity. Otherwise, it may cause imbalance and excessive wear of the impeller, and even cause blockage of the impeller channel and intermediate feeding pipe, making the crusher unable to work properly. If excessive feeding is found, it should be promptly removed.

　　When the discharge equipment is stopped, it should be stopped in a timely manner, otherwise it may cause the impeller to flatten and the motor to burn out. Ensure continuous and uniform feeding. During the operation of the crusher, there should be no severe vibration or abnormal noise, otherwise the operation should be stopped. The lubrication method of the machine is dry oil lubrication. When the pebble sand machine equipment is working in each shift, add a proper amount of grease. After several shifts, open the main bearing to clean the main bearing, and replace the bearing if necessary.

　　At present, the use of sand machine equipment is also very large, mainly through the processing of mountain stones and river sand, and the use of relevant sand making equipment to process sand. The main processing equipment is river pebble sand machine equipment, which is generally also called sand washing machine equipment, also known as crusher machine. It can not only make sand, but also be used for processing other materials. However, when using river pebble sand machine equipment, attention should also be paid to the machine failure, In order to solve the problem in a timely manner during construction.